Hot line/Fax:0086-020-83706905     Tel:18802091429 中文 | English

Dust sensors are used in air conditioners to monitor indoor dust

Update: 2020-09-16 17:19 Source: LUFTMY Reading: ↻ News
 

In the hot summer, air conditioning is essential for homes, shopping malls, public transportation and other places. Even in the hot summer, you can enjoy a comfortable temperature indoors.With the development of intelligent home, air conditioning has been upgraded in function and experience.Like fresh air ventilation function, humidity monitoring, dust monitoring and so on.

Dust sensors are used in air conditioners to monitor indoor dust

The air itself has invisible dust particles, because the air conditioning filter adsorption ability, will eventually accumulate in the air conditioning outside the internal machine.The humid and hot environment outside the machine is exactly the paradise for bacteria and viruses to breed.According to the department of inspection has done a survey into the home shows that a year does not clean the air conditioning, bacteria, mold detection rate is 100%!Among them, the bacteria on the heat sink exceeds the standard by hundreds of times.Other studies have shown that air conditioners contain more bacteria than toilets.

Now, with the continuous development of products, air conditioners contain many sensors, among which temperature sensors and humidity sensors are essential. There are also many brands that embed dust sensors into air conditioners. Why should dust sensors be built into air conditioners?What are the advantages of the built-in dust sensor in the air conditioner?

Any every coin has two sides, have a bad side, air conditioning air conditioning in the cold wind blowing at the same time, also the bacteria in the air, dust and other microbes converged on the indoor machine of fin, time is long can produce bacteria, parasites, such as mite bug to spread by blowing again in the air, will pollute the air, people often get sick because of this, so the dust in the air conditioning units built-in sensors can be to monitor PM1.0, PM2.5 and PM10 particles at the same time, also installed the dust sensor based on real-time monitoring of the air conditioning data to update the indoor air dust, the dust concentration of indoor environment control in a reasonable range,Avoid to cause harm to human health because dust concentration is too high.In addition, the fan intake can be controlled based on dust concentration monitoring data to meet the requirements of energy conservation and environmental protection.

Now add dust in air conditioner sensors to help consumers away from the dust pollution, will become a new trend in the future technology, and is also a new development direction of air conditioner, the built-in dust sensors for air conditioning low dust exceed recommended LD16 laser sensor, small volume, strong ability to resist dust, using Mie spherical particle scattering principle, 0.1 ~ 10 microns of dust particles can be detected, embedded in the air conditioning or fresh air system, providing timely and accurate concentration data.

LD16 Laser PM2.5 Dust Sensor Model
LD16 Laser PM2.5 Dust Sensor Model

Online application

Product Advantage